After cutting out your applique pieces from the freezer paper, the next step is to iron them onto the wrong side of your fabric, waxy side to the fabric. The light coating of wax melts just enough to adhere the freezer paper to the fabric. You will be using the freezer paper as a template. Cut out your shape, leaving a scant quarter inch seam allowance as you see in my photo above. I clipped the edges of the seam allowance every inch or so all around. Not right down to the freezer paper, only about half way.
We are going to apply starch to the seam allowance and iron it down all around the edge of the freezer paper template.
But before we do that, here is a question for you applique pros out there: I have seen instructions that call for ironing the freezer paper to the RIGHT side of the fabric and pressing the seam allowance under. How does that work? It seems like you lose the effect of the freezer paper being a template that way. I would love to know if any of you do it that way and why you like it. Here are pictures of the freezer paper ironed to the right side of the fabric. What advantage is that? I don't get it. I really want to understand this–someone explain it, please?
Moving on.
Here I am painting the starch onto the seam allowance of my applique piece. I am not left handed, but had to do it that way since I am holding my camera with my right hand!
Next, iron your seam allowance down over the edge of the freezer paper.
See that cute teensy iron? I bought it specifically to use for applique. It is super hot and so small that you can iron down the most microscopic pieces. Clover Mini Iron II.
But, there was a problem I want to tell you about.
It is a great little tool, and I was ironing away at my seam allowances, happy as can be. The tool comes with a little rest stand that you can lay the hot iron on when you need to set it down. The stand has a plastic base and a little metal piece that sticks up to hold the hot part of the iron. I set the hot iron on it and went back to get my next applique piece. This is what I found when I came back.
The iron had rolled over slightly and the hot part came in contact with the plastic base of the rest stand. The plastic melted all over the iron. I could not get it off while it was all hot and melty, and when it dried the iron was now coated in plastic. It was ruined after I had only used it for about fifteen minutes! Talk about a poor design. So now I am back to using my big iron to iron down all my little seam allowances.
I will probably buy another little iron, but will never use the little rest stand that comes with it. Maybe another brand will have a better design. Any suggestions?
80 responses to “Freezer Paper and a Cautionary Tale”
I use a spare ceramic tile that I had laying around as my iron rest for my small iron.
I use a spare ceramic tile that I had laying around as my iron rest for my small iron.
Yes, a ceramic tile works well – I found it sometimes wanted to roll off becasue of the cord. This was the first version of the tool and it looks like a different style. I ended up putting a glass or coffee mug on the tile and setting the tool tip in the glass and that worked well. I hope you can get a replacement from Clover – this can’t be the first time this has happened! Good luck with your new adventure!!!!!
Yes, a ceramic tile works well – I found it sometimes wanted to roll off becasue of the cord. This was the first version of the tool and it looks like a different style. I ended up putting a glass or coffee mug on the tile and setting the tool tip in the glass and that worked well. I hope you can get a replacement from Clover – this can’t be the first time this has happened! Good luck with your new adventure!!!!!
The freezer paper on top is used with needle turn applique. You can use it as a guide as you turn your edges under.
The freezer paper on top is used with needle turn applique. You can use it as a guide as you turn your edges under.
I use freezer paper simply as a template for needle turning my shapes. I iron them onto the right side of the fabric, trace around them with either black or white pencil then cut a generous 1/8th inch around each one. When ready to place the piece I remove the paper and stitch. I found all the gluing, starching, pressing too many steps and got far less stitching done to suit me. I have a teeny iron too but have only used it once. I think I used a saucer to rest it on. Good luck.
I use freezer paper simply as a template for needle turning my shapes. I iron them onto the right side of the fabric, trace around them with either black or white pencil then cut a generous 1/8th inch around each one. When ready to place the piece I remove the paper and stitch. I found all the gluing, starching, pressing too many steps and got far less stitching done to suit me. I have a teeny iron too but have only used it once. I think I used a saucer to rest it on. Good luck.
I do a variation of this method that uses a washable glue stick to secure the seam allowance to the non-shiny part of the freezer paper. It is fast and easy, and doesn’t melt things. The piece must then be dampened at the area with the glue after the applique is stitched to remove the paper.
I do a variation of this method that uses a washable glue stick to secure the seam allowance to the non-shiny part of the freezer paper. It is fast and easy, and doesn’t melt things. The piece must then be dampened at the area with the glue after the applique is stitched to remove the paper.
I learned to do applique with the freezer paper on the right side of the fabric, too. Then you turn the seam allowance under and use washable glue to tack it down to itself (you could do the starch and iron method here instead). Now you have the shape to applique and you can just peel the freezer paper off the top (and reuse it) instead of prying it out of a half sewn shape.
I learned to do applique with the freezer paper on the right side of the fabric, too. Then you turn the seam allowance under and use washable glue to tack it down to itself (you could do the starch and iron method here instead). Now you have the shape to applique and you can just peel the freezer paper off the top (and reuse it) instead of prying it out of a half sewn shape.
I don’t know if this will work in this particular case, but Sharon Schamber recommends using Mr. Clean Magic Eraser to clean the applique glue from your iron. I have done this many times, and it works beautifully. You can use it when the iron is hot or cold. Just dampen the sponge and run the iron over it (with a towel beneath) until it’s clean. Good luck!
I don’t know if this will work in this particular case, but Sharon Schamber recommends using Mr. Clean Magic Eraser to clean the applique glue from your iron. I have done this many times, and it works beautifully. You can use it when the iron is hot or cold. Just dampen the sponge and run the iron over it (with a towel beneath) until it’s clean. Good luck!
when i bought my Clover mini-iron, the shop included a little ironware crock (about the same size as a kitchen utensil crock) to put it in (tip down) and it has never managed to get away from me … i think an over-sized coffee mug would work just as well (might even require a trip to your local coffee shop – ha ha ha)!!!
when i bought my Clover mini-iron, the shop included a little ironware crock (about the same size as a kitchen utensil crock) to put it in (tip down) and it has never managed to get away from me … i think an over-sized coffee mug would work just as well (might even require a trip to your local coffee shop – ha ha ha)!!!
Nicole, I have one of these handy dandy irons and I use a coffee cup to rest the iron in when not in use. Doesn’t hurt the cup and it doesn’t hurt the iron. Those little stands are a joke. Lizzie
Nicole, I have one of these handy dandy irons and I use a coffee cup to rest the iron in when not in use. Doesn’t hurt the cup and it doesn’t hurt the iron. Those little stands are a joke. Lizzie
Like Helen, I use the freezer paper on top with a needle turn method. I then finger press the fabric under as I move around the applique piece sewing it down. I pin the pieces in place using short applique pins that are less inclined to snag the thread while I’m sewing. I like the instant gratification of tracing, pressing the paper on and sewing. And when I’m done, I just peel the paper from the top. I find that the freezer paper stablizes the fabric so it can be rolled under just as I want it for straight lines and smooth curves. I find that this works for me on any piece larger than 1/2 inch or so.
Like Helen, I use the freezer paper on top with a needle turn method. I then finger press the fabric under as I move around the applique piece sewing it down. I pin the pieces in place using short applique pins that are less inclined to snag the thread while I’m sewing. I like the instant gratification of tracing, pressing the paper on and sewing. And when I’m done, I just peel the paper from the top. I find that the freezer paper stablizes the fabric so it can be rolled under just as I want it for straight lines and smooth curves. I find that this works for me on any piece larger than 1/2 inch or so.
I own that little iron, but haven’t used it yet. Thanks for the caution, and thanks for all the remarks with hints on how to avoid that melting.
I own that little iron, but haven’t used it yet. Thanks for the caution, and thanks for all the remarks with hints on how to avoid that melting.
I use a Hobbico Custom Sealing Iron. I don’t use the stand that comes with it….it gets too hot. I have a heavy duty stand that I bought separately. I also put my Best Press starch in a special fabric ‘pen’. I used to use a brush, but using the pen, I can be absolutely surgical when it comes to starch application.
I use freezer paper sheets, and I double them for crisp edges. I draw on the shiny side then iron two sheets together with my drawn lines ironed to the dull side of another sheet. That way, there is still a shiny side to iron on the back of my fabric. It is best to iron the freezer paper sheet together on a mat that has a Teflon surface so it doesn’t stick. Have fun!
I use a Hobbico Custom Sealing Iron. I don’t use the stand that comes with it….it gets too hot. I have a heavy duty stand that I bought separately. I also put my Best Press starch in a special fabric ‘pen’. I used to use a brush, but using the pen, I can be absolutely surgical when it comes to starch application.
I use freezer paper sheets, and I double them for crisp edges. I draw on the shiny side then iron two sheets together with my drawn lines ironed to the dull side of another sheet. That way, there is still a shiny side to iron on the back of my fabric. It is best to iron the freezer paper sheet together on a mat that has a Teflon surface so it doesn’t stick. Have fun!
Check out this post for a suggestion. http://bunnyhillblog.com/2011/05/22/raised-in-the-country/
Check out this post for a suggestion. http://bunnyhillblog.com/2011/05/22/raised-in-the-country/
Folks have posted such great suggestions here!
Sorry about your mini iron. Hope the Mr. Clean product works or Clover gives you another iron for free.
Hugs!
Folks have posted such great suggestions here!
Sorry about your mini iron. Hope the Mr. Clean product works or Clover gives you another iron for free.
Hugs!
ceramic tile to the rescue for sure!!
ceramic tile to the rescue for sure!!
I’m with you on the freezer paper on top. Why? Reading the comments I can see how it’s useful for needleturn applique. I tried it a few times when I used glue to turn the edges under but I found that the edges of my piece were never as crisp as when I put the freezer paper on the wrong side. So, I stopped using it on the right side.
On the iron… Rowenta has a cleaner for thier irons that is like a paste you put on a towel. You then heat the iron up and ‘iron’ the paste onto the sole. After a bit of rubbing the soleplate is clean. You then rub the iron on a soft cloth that sort of polishes it. I was wondering if heating the iron and using something like that would get the plastic off. I have the Hobbico iron but I find it gets ridiculously hot. I honestly feel I need an oven mit to hadle it! LOL!
Softexpressions has a Craft Iron Tile holder that looks to be a better solution than the plastic.
I’m with you on the freezer paper on top. Why? Reading the comments I can see how it’s useful for needleturn applique. I tried it a few times when I used glue to turn the edges under but I found that the edges of my piece were never as crisp as when I put the freezer paper on the wrong side. So, I stopped using it on the right side.
On the iron… Rowenta has a cleaner for thier irons that is like a paste you put on a towel. You then heat the iron up and ‘iron’ the paste onto the sole. After a bit of rubbing the soleplate is clean. You then rub the iron on a soft cloth that sort of polishes it. I was wondering if heating the iron and using something like that would get the plastic off. I have the Hobbico iron but I find it gets ridiculously hot. I honestly feel I need an oven mit to hadle it! LOL!
Softexpressions has a Craft Iron Tile holder that looks to be a better solution than the plastic.
The only time I use freezer paper on top is when I want to do needle-turn. It simply shows you where to turn under and helps you keep things lined up. I’ve done it both ways, it just depends on the project. Good Luck! 🙂
The only time I use freezer paper on top is when I want to do needle-turn. It simply shows you where to turn under and helps you keep things lined up. I’ve done it both ways, it just depends on the project. Good Luck! 🙂
Did you see what happened to Victoria (over at Bumble Beans) and her little clover iron? Check it out here http://bumblebeansinc.blogspot.com/2011/05/weekend-nyc-mn.html
Another cautionary tale…you don’t want to burn your fabric or even worse…your home!
Did you see what happened to Victoria (over at Bumble Beans) and her little clover iron? Check it out here http://bumblebeansinc.blogspot.com/2011/05/weekend-nyc-mn.html
Another cautionary tale…you don’t want to burn your fabric or even worse…your home!
The best idea I have seen for resting those little irons on is a potato masher – the kind like our grandmothers used! I’ve also seen some holders at the local quilt shows. I’m not sure if they are manufactured or a home hobbyist has made them, but they have a wood base and a ceramic piece with a curve for resting the iron on. I think I have one around here somewhere……..
The best idea I have seen for resting those little irons on is a potato masher – the kind like our grandmothers used! I’ve also seen some holders at the local quilt shows. I’m not sure if they are manufactured or a home hobbyist has made them, but they have a wood base and a ceramic piece with a curve for resting the iron on. I think I have one around here somewhere……..
My Clover mini came with several interchangeable “tips” – if you can’t get the melted plastic off, maybe you can find a replacement tip? Or email me & I’ll send you mine – I have a large & a small tip & don’t really need both.
My Clover mini came with several interchangeable “tips” – if you can’t get the melted plastic off, maybe you can find a replacement tip? Or email me & I’ll send you mine – I have a large & a small tip & don’t really need both.
Nicole, Have you ever tried Kim Diehl’s applique method? It is wonderful! She uses freezer paper too, but instead of ironing the shiny side to the wrong side of the fabric, you put a little glue, using a glue stick, on the matte side of the paper, glue that to the wrong side of the fabric, then using a hot iron, you iron the seam allowance to the shiny side of the paper and it will stick. No starch, no brush, etc. That is my favorite applique method. If you have on of her books, she explains how to do it. If you ever have a chance to take a class from her, I would highly recommend it.
Nicole, Have you ever tried Kim Diehl’s applique method? It is wonderful! She uses freezer paper too, but instead of ironing the shiny side to the wrong side of the fabric, you put a little glue, using a glue stick, on the matte side of the paper, glue that to the wrong side of the fabric, then using a hot iron, you iron the seam allowance to the shiny side of the paper and it will stick. No starch, no brush, etc. That is my favorite applique method. If you have on of her books, she explains how to do it. If you ever have a chance to take a class from her, I would highly recommend it.
I iron the freezer paper onto the back of my fabric, then draw around the applique. Then I cut it out leaving a scant 1/4″of fabric. The freezer paper template is reusable for several times. I then needle turn. I think this is much quicker than what you are doing. I have friends who do your method but they use washable glue instead of starch. They just press it down with their fingers-no iron. I love applique, it gives me something I can work on while I watch TV.
I iron the freezer paper onto the back of my fabric, then draw around the applique. Then I cut it out leaving a scant 1/4″of fabric. The freezer paper template is reusable for several times. I then needle turn. I think this is much quicker than what you are doing. I have friends who do your method but they use washable glue instead of starch. They just press it down with their fingers-no iron. I love applique, it gives me something I can work on while I watch TV.
Here’s a link to a 3 part tutorial on how to use freezer paper on top. The rest of tutorial links can be found on the blog archives for April. http://fabrictherapy.blogspot.com/2011/04/glue-stick-applique-tutorial-part-one.html
Here’s a link to a 3 part tutorial on how to use freezer paper on top. The rest of tutorial links can be found on the blog archives for April. http://fabrictherapy.blogspot.com/2011/04/glue-stick-applique-tutorial-part-one.html
Hi Nicole,
I use a travel style ceramic mug (that actually doesn’t work for travelling) which is very wide on the bottom. I just stick my mini-iron in there. Because the bottom is wider than the top, it doesn’t tip over. Everything I read when I got the iron said to throw the stand away. There are some wooden stands available that attach to the plastic one, but I already had the mug. 🙂
Ann
Hi Nicole,
I use a travel style ceramic mug (that actually doesn’t work for travelling) which is very wide on the bottom. I just stick my mini-iron in there. Because the bottom is wider than the top, it doesn’t tip over. Everything I read when I got the iron said to throw the stand away. There are some wooden stands available that attach to the plastic one, but I already had the mug. 🙂
Ann
I use the freezer paper method that you are demonstrating but I double up the freezer paper – iron two pieces together (waxy side to a dull side) – before I cut out the shapes. This seems to give you a crisper and bit more stable edge when you starch and press your 1/4″ over. I have had great success with this method.
I use the freezer paper method that you are demonstrating but I double up the freezer paper – iron two pieces together (waxy side to a dull side) – before I cut out the shapes. This seems to give you a crisper and bit more stable edge when you starch and press your 1/4″ over. I have had great success with this method.
Oh my gosh!!!! I bought the same iron(on sale) but haven’t used it yet. Seriously, you should write to Clover and tell them what happened and include a picture. Clover is owned by Lecien. You should be able to find an email address to write to.
That is SO wrong and that iron is expensive!
Oh my gosh!!!! I bought the same iron(on sale) but haven’t used it yet. Seriously, you should write to Clover and tell them what happened and include a picture. Clover is owned by Lecien. You should be able to find an email address to write to.
That is SO wrong and that iron is expensive!
I am just amazed at all the wonderful suggestions! In all of them, I had totally forgotten about Kim Diehl’s method – it’s worth looking at, Nicole! Also, I know ice works well on getting gum off of things – perhaps that might work on that melted plastic?
Cheers!
I am just amazed at all the wonderful suggestions! In all of them, I had totally forgotten about Kim Diehl’s method – it’s worth looking at, Nicole! Also, I know ice works well on getting gum off of things – perhaps that might work on that melted plastic?
Cheers!
Are you using one layer of freezer paper? I was taught to use two to thicken up the template. I would love to use only one layer-how is it working? BTW, found a GREAT iron to use for starch-freezer paper technique. Check out Bunny Hill site, click on notions and she has a great iron:)
Are you using one layer of freezer paper? I was taught to use two to thicken up the template. I would love to use only one layer-how is it working? BTW, found a GREAT iron to use for starch-freezer paper technique. Check out Bunny Hill site, click on notions and she has a great iron:)
I use a coffee mug because my mini iron is one of the old ones that does not have the red protective ‘cage’ and it is very easy to grab that hot, hot stem. By putting it in the mug that stem, like the head, is out of reach.
I use a coffee mug because my mini iron is one of the old ones that does not have the red protective ‘cage’ and it is very easy to grab that hot, hot stem. By putting it in the mug that stem, like the head, is out of reach.
LOL! Thanks for making me laugh this morning! This is why love your tutorials and blog 🙂 Those little stands are a joke and I guess I always just laid my mini-iron on its side on the ironing board, careful not to burn the board…but there are little “mini-iron” marks on it 🙂 I like the mini crock/mug idea. I use a tile holder for my glue gun and never thought about it for my mini iron. As for cleaning your iron there is something at the quilt shop that they use for cleaning the residue of fusibles off the irons. I forget the name because it’s always sold out when I want to buy some but they swear it takes everything off. You may want to try it. Can’t wait to see your next step 🙂
LOL! Thanks for making me laugh this morning! This is why love your tutorials and blog 🙂 Those little stands are a joke and I guess I always just laid my mini-iron on its side on the ironing board, careful not to burn the board…but there are little “mini-iron” marks on it 🙂 I like the mini crock/mug idea. I use a tile holder for my glue gun and never thought about it for my mini iron. As for cleaning your iron there is something at the quilt shop that they use for cleaning the residue of fusibles off the irons. I forget the name because it’s always sold out when I want to buy some but they swear it takes everything off. You may want to try it. Can’t wait to see your next step 🙂
I use a regular iron for freezer paper applique and have no problems with that. I just use the tip of the iron as I go around. I love this method of applique.
I use a regular iron for freezer paper applique and have no problems with that. I just use the tip of the iron as I go around. I love this method of applique.
Nicole, I’m so sorry your little iron was ruined!!! I have the same little iron and as ‘di’ posted already, I found mine kept trying to roll the very first time I used it, so I grabbed a ceramic tile to lay it on when I put it down. It worked great but I still worried the cord could slide it off, so I went to the kitchen and pulled out a ‘Soup Mug’ with a handle that I can easily slide the iron into but when I lay it down in the crook of the handle, it catches and can’t slide out, and the mug is heavy enough the cord can’t pull it. Besides…I can mix my starch in the mug so everything is right there! The problem with the little stand definitely is poor design. I view it as a fire hazard too and I hope one of these days, they make a really good stand for them. All the same, I love that little iron for applique and for stubborn intersections and corners on my blocks. I also love my soup mug as a holder! Hugs…
Nicole, I’m so sorry your little iron was ruined!!! I have the same little iron and as ‘di’ posted already, I found mine kept trying to roll the very first time I used it, so I grabbed a ceramic tile to lay it on when I put it down. It worked great but I still worried the cord could slide it off, so I went to the kitchen and pulled out a ‘Soup Mug’ with a handle that I can easily slide the iron into but when I lay it down in the crook of the handle, it catches and can’t slide out, and the mug is heavy enough the cord can’t pull it. Besides…I can mix my starch in the mug so everything is right there! The problem with the little stand definitely is poor design. I view it as a fire hazard too and I hope one of these days, they make a really good stand for them. All the same, I love that little iron for applique and for stubborn intersections and corners on my blocks. I also love my soup mug as a holder! Hugs…
I don’t do needle turn appliqué, so I’ve always stuck the freezer paper to the wrong side of the fabric. Sorry about the iron situation! Wow!!
I don’t do needle turn appliqué, so I’ve always stuck the freezer paper to the wrong side of the fabric. Sorry about the iron situation! Wow!!
Without reading all the comments, I hope you will be returning that little cute iron. You were not using the tool improperly…poor design, is right.
I’m really happy to have you doing this applique tutorial. Makes me feel like I could tackle this challenge. Thank you.
Without reading all the comments, I hope you will be returning that little cute iron. You were not using the tool improperly…poor design, is right.
I’m really happy to have you doing this applique tutorial. Makes me feel like I could tackle this challenge. Thank you.
Oh, no! Sorry about your mishap with the iron stand. How frustrating. I use that little iron for my freezer paper applique, too.
Oh, no! Sorry about your mishap with the iron stand. How frustrating. I use that little iron for my freezer paper applique, too.
We (me and some of my applique friends)have been using the Hobbico irons for our applique prep. But last month when the Pirate quilters gathered for the Pirate Retreat Helen had a new mini Iron that she has come to love.
http://www.joann.com/joann/catalog/productdetail.jsp?pageName=search&flag=true&PRODID=xprd1134014
She loves it. I have not tried it yet. Just another thing you might want to check out.
We (me and some of my applique friends)have been using the Hobbico irons for our applique prep. But last month when the Pirate quilters gathered for the Pirate Retreat Helen had a new mini Iron that she has come to love.
http://www.joann.com/joann/catalog/productdetail.jsp?pageName=search&flag=true&PRODID=xprd1134014
She loves it. I have not tried it yet. Just another thing you might want to check out.
My dad made wooden holders for those little irons because the ones they come with are no good, as you discovered! Have you tried Goo Gone to get rid of the plastic on your iron? It has done wonders for my iron. You can get it at JoAnn’s if you have one in the area.
My dad made wooden holders for those little irons because the ones they come with are no good, as you discovered! Have you tried Goo Gone to get rid of the plastic on your iron? It has done wonders for my iron. You can get it at JoAnn’s if you have one in the area.
I took a applique class and the teacher used a coffee mug to hold the iron, it’s deep enough to hold and not tip over or fall out
I took a applique class and the teacher used a coffee mug to hold the iron, it’s deep enough to hold and not tip over or fall out
After taking different clases on applique I became sold on the Piece ‘o Cake method. Becky Goldsmith explains it so well in her class and in her book with Linda Jenkins. The template method seemed to me like too many steps to get to the sewing of the applique and too much of a hassel. Only time I use the freezer paper is for making the little circles/grapes/berries. I also do not use the mini iron stand – a tall cup was the answer.
After taking different clases on applique I became sold on the Piece ‘o Cake method. Becky Goldsmith explains it so well in her class and in her book with Linda Jenkins. The template method seemed to me like too many steps to get to the sewing of the applique and too much of a hassel. Only time I use the freezer paper is for making the little circles/grapes/berries. I also do not use the mini iron stand – a tall cup was the answer.
I do multiple variations of the freezer paper, glue and starch techniques. If I place the freezer paper on the wrong side of the fabric then I use the starch to press the seam allowance down. Once the allowance is pressed I remove the freezer paper gently and repress to make sure it lays flat. If needed I then place tiny dots of the glueaway from the edge (so needle will pass through) before laying it in place on the background. That way I don’t need to cut away any of the background, or distort my piece. Sometimes I will pu the freezer paper on top and finger press the seam allowance.
I have the same little iron you have, and put it away since I have managed to burn myself a few times. In it’s place I have a travel iron that works great with no burns. 🙂
I do multiple variations of the freezer paper, glue and starch techniques. If I place the freezer paper on the wrong side of the fabric then I use the starch to press the seam allowance down. Once the allowance is pressed I remove the freezer paper gently and repress to make sure it lays flat. If needed I then place tiny dots of the glueaway from the edge (so needle will pass through) before laying it in place on the background. That way I don’t need to cut away any of the background, or distort my piece. Sometimes I will pu the freezer paper on top and finger press the seam allowance.
I have the same little iron you have, and put it away since I have managed to burn myself a few times. In it’s place I have a travel iron that works great with no burns. 🙂